Standard isothermal cargo covers that safeguard from changes in temperature, protecting against heat from radiation (through the wall of the container) and convection (hot air circulating inside the container).

Uses:
Powders, pellets, cosmetics, chemical products, pharmaceutical products, bulk goods, foodstuffs, polymers, resins, hot fill products, adhesives, wine and distilled drinks, etc.

Characteristics:

• Aluminium foil
• Polyester weave
• Kits for 20’ and 40’ boxes
• 20’, 40’ and HC containers
• With and without base.
• Assembled using telescopic rods (fast, 5-minute assembly by a single person).

Benefits:

• They prevent damage to goods, saving on costs.
• Made to measure.
• They protect against humidity, oxygen and light.

Standard isothermal cargo covers that safeguard from changes in temperature, protecting against heat from radiation (through the wall of the container) and convection (hot air circulating inside the container). Low cost system using border tape and four straps (two at the front).

Uses:
Powders, pellets, cosmetics, chemical products, pharmaceutical products, bulk goods, foodstuffs, polymers, resins, hot fill products, adhesives, wine and distilled drinks, etc.

Characteristics:

• Aluminium foil.
• Polyester weave.
• Kits 20’ and 40’ boxes.
• 20’, 40’ and HC containers.
• With and without base.
• Assembled with fastening clips.

Benefits:

• They prevent damage to goods, saving on costs.
• Made to measure.
• They protect against humidity, oxygen and light.

Thermal insulation system using ridged plates inside containers for exporting foodstuffs and chemical products which are sensitive to sudden changes in temperature.

Uses:
Pharmaceuticals, cosmetics, wine and spirits, juices, foodstuffs, chemical products, etc.

Characteristics:

• Rated thickness: 40 mm
• Rated density: 35 Kg/m³
• Product colour: Orange
• Water resistance: Total/resistant product
• Plate measurements: 2300x600x40 mm

Benefits:

• Temperature control for shipments.
• Easy to put on.
• Low-cost option, reduce costs.

Rolls of isothermal covers for standard 20' and 40' containers. Thermal blanket.
These covers insulate the container from external temperature changes. They are made from two outer layers of aluminium and a layer of low-density, 31.5-mm diameter polyethylene bubble wrap.

Uses: powders, pellets, chemical products, pharmaceutical products, foodstuffs, polymers, resins, adhesives, etc.

Characteristics:

• Weight 212 g/m³.
• Being so thin, they do not reduce container capacity.
• Easy to put on and take off

Benefits:

• They prevent damage to goods
• Made to measure
• They protect against humidity, oxygen and light

Isothermal covers that protect pallet-stacked products from external temperature changes.

Uses:
Pallet-stacked products such as foodstuffs, chemical products, pharmaceuticals, cosmetics, wine, oil, etc.

Characteristics:

• Logistics and traceability (pharmaceuticals, foodstuffs, drinks).
• Temperature control for shipments.
• Single-use cover.
• Easy to put on.
• Low cost.
• They guarantee a stable temperature curve.
• They protect against external climate effects.
• Suitable for use with foodstuffs.

Benefits:

• Temperature control for shipments.
• Single-use cover.
• Easy to put on.
• Low cost/ Reduce costs.

Air-Embacover is a system that protects cargo in air freight containers against sudden changes in temperature and the effects of humidity. It can be installed with ease in 5 minutes. It is especially useful for protecting products that are sensitive to changes in temperature.

Uses:
Ait freight containers (AKE TYPE - AFF TYPE - APP TYPE).

Characteristics:

• Aluminium foil.
• Polyester weave.

Benefits:

• Temperature control for shipments.
• Low cost (cost reduction).
• Easy installation.